百度香港东方日报
您好,欢迎访问北京金万正环保设备制造厂官网!

不锈钢小车钣金加工

  • 不锈钢小车钣金加工

不锈钢小车钣金加工

详细信息

不锈钢小车钣金加工注意事项:

1.一切电化学处理都应在零件状态下进行,由于处理过程中的化学溶液会被截留在组合件的缝隙之中而引起腐蚀;
2.表面处理时喷涂分喷漆及喷粉两种,是将料件经过前处理以后,用喷枪,气体把涂料喷到不锈钢钣金工件表面上,涂料在工件表面形成涂层.烘干后,起防护的作用;
3.钢铁件喷涂前建议先进行磷化处理,以增加涂层的附着力。

Precautions for processing stainless steel trolley sheet metal:

1. All electrochemical treatment should be carried out under the condition of the part, because the chemical solution in the process will be trapped in the gap of the assembly and cause corrosion;
2. When the surface treatment is sprayed with two kinds of spray paint and powder spray, after the material is pre-treated, the paint is sprayed onto the surface of the stainless steel sheet metal workpiece by a spray gun, and the paint forms a coating on the surface of the workpiece. After drying, The role of protection;
3. It is recommended to phosphating the steel parts before spraying to increase the adhesion of the coating.

网站首页 / 产品中心 / 关于我们 / 经典案例 / 新闻资讯 / 常见问题 / 在线留言 / 联系我们 / 网站地图 / XML地图

北京金万正环保设备制造厂 地址:北京市昌平区流村镇北流村工业园区

联系人:崔先生 电话:18601288559 / 18519706657 QQ:1065043717 邮箱:[email protected]

技术支持:杭州四喜